खोज
       
   
    
DGFT Notification, the 24th November 2000

TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY

PART-II, SECTION-3, SUB SECTION (II)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

NOTIFICATION NO. 44 (RE-2000)/1997-2002

NEW DELHI:  24TH  NOVEMBER, 2000

S.O. (E)- In exercise of powers conferred under section 5 of the Foreign Trade (Development and Regulation) Act, 1992 read with paragraph 1.3 and 4.1 of the Export and Import Policy, 1997-2002, the Central Government hereby makes the following amendments in the ITC(HS) Classifications of Export and Import Items, 1997-2002 published on 31st March, 1997 (RE-98) as amended from time to time namely –

2.The following shall be added after paragraph 4 of Chapter 1A: General notes regarding import policy, of ITC(HS) Classifications of Export and Import Items, 1997-2002:

4.All such packaged products, which are subject to provisions of the Standards of Weights and Measures (Packaged Commodities) Rules, 1977 when produced/packed/sold in domestic market, shall be subject to

compliance of all the provisions of the said rules, when imported into India.  The compliance of these shall be ensured before the import consignment of such commodities is cleared by Customs for home consumption.  All prepackaged commodities, imported into India, shall in particular carry the following declarations:

(a)    Name and address of the importer;

(b)    Generic or common name of the commodity packed;

(c)    Net quantity in terms of standard unit of weights and measures.  If the net quantity in the imported package is given in any other unit, its equivalent in terms of standard units shall be declared by the importer;

(d)    Month and year of packing in which the commodity is manufactured or packed or imported;

(e)    Maximum retail sale price at which the commodity in packaged form may be sold to the ultimate consumer.  This price shall include all taxes local or otherwise, freight, transport charges, commission payable to dealers and all charges towards advertising, delivery, packing, forwarding and the like as the case may be.

 

5. A new Appendix V to Schedule 1 of ITC(HS) Classifications of Export and Import Items, 1997-2002, shall

  annexed as per annexure ‘A’ of this Notification.

6. Import of all the products as per Appendix V to Schedule 1 of the ITC (IIS) Classifications of Export and Import Items  1997-2002, shall be subject to compliance of the mandatory Indian Quality Standards as mentioned in

column 2 of the said   Annexure, which are also applicable to domestic goods.  For compliance of this requirement, all manufacturers/exporters of   these products to India, shall be required to register themselves with Bureau of Indian Standards (BIS).”

This issues in Public Interest.

(N.L. LAKHANPAL)

Director General of Foreign Trade and ex-officio

Additional Secretary to the Government of India

Copy to all concerned.

(O.P. HISARIA)

Dy. Director General of Foreign Trade

(Issued from File No.01/89/180/00053/AM01/)


ANNEXURE ‘A’ TO NOTIFICATION
NO.44 DATED 24th November, 2000

APPENDIX V

 

S.No.

Applicable BIS

Standards

1. Name of the products

IS 1694

Tartrazine, Food grade

IS 1695

Sunset Yellow FCF, Food grade

IS 1697

Erythrosine, Food grade

IS 1698

Indigo Carmine, Food grade

IS 2558

Ponceau 4R, Food grade

IS 2923

Carmoisine, Food grade

IS 5346

Synthetic Food Colour preparation and mixtures

IS 6022

Fast green FCF, Food grade

IS 6406

Brilliant Blue FCF, Food grade

IS 3827

Riboflavin

IS 3841

B-Carotene

IS 4446(Pt1)

Chlorophyll, (Mg Complex)

IS 4446(Pt2)

Chlorophyll, (Cu Complex)

IS 6386

Beta-apo-8-Carotenal, Food grade

IS 6405

Centhaxanthine, Food grade

IS 6797

Methyl ester of beta-apo-8-carotenoic acid, Food grade

IS 7260

Ethylester of beta-apo-8-carotenoic acid, Food grade

IS 2557

Anmatto colour for food products

IS 4447

Sodium benzoate, Food grade

IS 4448

Benzoic acid, Food grade

IS 4467(Pt.1)

Caramel (Plain)

IS 4467(Pt.2)

Caramel (Ammonia Process)

IS 4467 (Pt.3)

Caramel (Ammonia sulphite process)

IS 4750

Sorbitol, Food grade

IS 4751

Potassium meta-bisulphite, Food grade

IS 4752

Sodium metabisulphite, Food grade

IS 4818

Sorbic acid, Food grade

IS 5191

Sodium alginate, Food grade

IS 5306

Sodium carboxymethyl cellulose, Food grade

IS 5342

Ascorbic acid, Food grade

IS 5343

Butylated hydroxy-anixole, Food grade

IS 5707

Agar, Food grade

IS 5719

Gelatin, Food grade

IS 6030

Sodium propionate, Food grade

IS 6031

Calcium propionate, Food grade

IS 6793

Fumaric acid, Food grade

IS 7905

Calcium alginate, Food grade

IS 7908

Sulphur dioxide, Food grade

IS 7928

Alginic acid, Food grade

IS 9504

Tartaric acid, Food grade

IS 10563

Mineral Oil, Food grade

IS 8356

Titanium dioxide, Food grade

IS 9971

DL Lactic Acid, Food grade

IS 1165

Milk Powder

IS 1166

Condensed milk

IS 1547

Infant milk foods

IS 1656

Milk-cereal base weaning foods

IS 11156

Infant formulae

IS 269

33 Grade Ordinary Portland cement

IS 455

Portland Slag cement

IS 1489(Pt.1 & Pt.2)

Portland pozzolana cement-Part I Flash based and Part 2 Calcined Clay based

IS 3466

Masonry cement

IS 6452

High alumina cement for structural use

IS 6909

Supersulphated cement

IS 8041

Rapid hardening Portland cement

IS 8042

White Portland Cement

IS 8043

Hydrophobic Portland Cement

IS 8112

43 Grade Ordinary Portland cement

IS 8229

Oil well cement

IS 12269

53 Grade Ordinary Portland cement

IS 12330

Sulphate resisting Portland cement

IS 12600

Low heat Portland cement

IS 1161

Steel tubes for structural purposes

IS 1239(Pt.1)

Mild steel tubes, tubular products and other wrought steel fittings: Part I Mild Steel Tubes

IS 4270

Steel tubes used for water wells (upto 200 mm dia)

IS 1342 

Oil pressure stoves

IS 2787

Multi-burner oil pressure stoves

IS 10109

Oil pressure stove, offset burner type

IS 418

Tungsten filament general service electric lamps (upto 100 W)

IS 302 (Pt.2/Sec 3)

Safety of household and similar electrical appliances-Electric Iron

IS 302(Pt.2/Sec.30)

Safety of household and similar electrical appliances- Electric radiators

IS 302 (Pt.2/Sec.201)

Safety of household and similar electrical appliances-Electric immersion water heater

IS 302 (Pt.2/Sec.202)

Safety of household and similar electrical appliances-Electric stove

IS 1293

3 pin plugs and socket outlets.

IS 3854

Switches for domestic and similar purposes

IS 4949

2 Amp Switches for electric and similar purposes

IS 277

Galvanized steel wire for telegraph and telephone purposes

IS 279

Galvanized steel wire for telegraph and telephone purposes

IS 280

Mild steel wire for general engineering purposes

IS 432(Pt.1)

Mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement

IS 432(Pt.2)

Cold rolled carbon steel sheets

IS 513

Hot rolled steel strips (baling)

IS 1`029

Hot rolled steel rivet bars (upto 40 mm diameter) structural purposes

IS 1079

Hot rolled carbon steel sheet and strip

IS 1148

Hot rolled steel rivet bars (upto 40 mm diameter) structural purposes

IS 1149

High tensile stel rivet bars for structural purposes

IS 1786

High strength deformed steel bars and wires for concrete reinforcement

IS 1875

Carbon steel billets, blooms, slabs and bars for forgings

IS 1977

Structural steel (ordinary quality)

IS 1990

Steel rivet and stay bars for boilers

IS 2002

Steel plates for pressure vessels for intermediate and high temperature service including boilers

IS 2062

Weldable structural steel

IS 2830

Carbon steel billets, blooms and slab for re-rolling into structural steel (standard quality)

IS 2831

Carbon steel billets, blooms and slab for re-rolling into structural steel (ordinary quality)

IS 2879

Mild steel for metal are welding electrode core wire

IS 3502

Steel chequered plates

IS 3748

Tool and die steels

IS 3930

Flame and induction hardening steels

IS  4368

Alloy steel billets, blooms and slab for forging for general engineering purpose

IS 4397

Cold rolled carbon steel strips for ball and roller bearing cages

IS 4398

Carbon-chromium steel for the manufacture of balls, rollers and bearing races

IS 4430

Mould steels

IS 4431

Carbon and carbon-manganese free cutting steel

IS 4432

Case hardening steels

IS  4882

Low carbon steel wire for rivets for use in bearing industry

IS 5489

carbureting steel for use in bearing industry

IS 5517

Steels for hardening and tampering

IS 5518

Steel for die blocks for drop forging

IS 5522

Stainless steel sheets and strips for utensils

IS 1989 (Pt.1)

Leather safety boots and shoes for miners

IS 2512

Miners’ cap lamp batteries (Lead acid type)

IS 1855

Standard steel wire ropes for winding and man-riding haulages in mines

IS 2148

Flameproof enclosures of electrical apparatus

IS 2925

Industrial safety helmets

IS  3196(Pt.1)

Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Pt I Cylinders for liquefied petroleum gas (LPG)

IS 3196(Pt.2)

Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Pt 2 Cylinders for liquefiable gases other than LPG

IS 3224

Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders

IS 3745

Yoke type valve connections for small medical gas cylinders

IS 7142

Welded low carbon steel gas cylinder for low pressure liquefiable gases not exceeding 5 litre water capacity

IS 7285

Seamless steel cylinders for permanent and high pressure liquefiable gases

IS 7302

Valve fittings for gas cylinder valves for use with breathing apparatus

IS 7312

Welded and seamless steel dissolved acetylene gas cylinders

IS 7680

Welded and seamless steel dissolved gas cylinders for ammonia

IS 7681

Welded and seamless steel dissolved gas cylinders for chlorine gas

IS 7682

Welded and seamless steel dissolved gas cylinders for methyl bromide gas

IS 8737

Valve fittings for use with liquefied petroleum gas cylinder of more than 5 litre water capacity: Pt 2 Valve fittings for newly manufactured LPG cylinders

IS  8776

Valve fittings for use with liquefied petroleum gas cylinder up to and including 5 litre water capacity

IS 3470

Hexane, Food grade

IS 8144

Multipurpose dry batteries

IS 7620(Pt.1)

Diagnostic Medical X-Ray Equipment

IS 14625

Plastic Feeding Bottles

 

 
Updated Package Commodity Rule as on 1.1.2007
Latest Guidelines on Packaged commodities Rules
THE STANDARDS OF WEIGHTS AND MEASURES ACT, 1976
The Standards of W&M (Enforcement), Act,1985
Revised Procedure for Model Approvals
Application Forms
Notifications
Notification G.S.R.551(E)
Notifications G.S.R.632(E)
Notification G.S.R. 865(E)
Notification G.S.R. 737(E) Dated 15.10.08
Notification No 425(E) Dt. 17.7.06
General Rules amendment GSR 199(E)
General Rules amendment GSR 238(E)
Amendment General Rules, the 5th April 2004
Amendment General Rules, the 5th April 2004
Notification, Gsr 665(General Rules),the 25th September 2002
Notification, the 5th April 2002
Notification, 9th Nov 2001
Notification, 29th May 2001
Notification, 14th May 2001
Notification, 28th February 2001
DGFT Notification, the 24th November 2000
Notification, the 24th November 2000
Notification, the 21st July 2000
Notification, the 24th May 2000
Notification, the 14th July 2004
Responsibility of the Centre and the States in relation to weights and measures
Sub-Ordinate lagislations of the Weights & Measures - Acts 1976
General Rules
IILM Rules
Inter-State Verification and Stamping Rule
Model Approval Rules
National Standards Rules
Numeration Rules
Order of Constitutions of Standing Committees
Standing Committee on Specification
Standing Committee on Inter State Verification & Stamping Rules
Addresses of Controllers
Organization & Functions
Standards of Weights & Measures Act in Detail
GuideLines for the registration
MODEL APPROVAL CERTIFICATE
Purchase of Instruments for RRSL/IILM
Address and Tel.No. of Legal Metrology officers